Home > Harley Davidson >

HD Easy Pull Clutch Lever & Front Brake Lever

HD Easy Pull Clutch Lever & Mathching Front Brake Lever

Alternative Views:

Our Price: $229.99

Product Code: HD-BKCL-COMBO

Front Brake Lever Bike/Model*:
04-13 Sportster
08-15 FL modelsBL03
2018-2021 Softail
96-15 Big Twin, Dyna, 96-03 XLBL01
Handlebar Diameter

Select Diameter:*:
HD 7/8"
HD 1"

Mirror Mount*:
Add Mirror Mount
None [Subtract -$18.00]
Lever Length

Select Size*:
1 FINGER 3.5"
1.5 FINGER 4"
2 FINGER 4.625"
3 FINGER 5.25"
Lever Color

Select Lever Color*:
Clear Anodize

Select Perch Color*:

Select Cap Color*:

Description Extended Information
In stock!!
The Patent Pending Elite Mototech Easy Pull Clutch Lever & Matching Front Brake Lever are a highly precision CNC machined lever made out of 6061 aluminum and anodized in a verity of colors so you can customize it to your liking. We have gone the extra mile to make sure our product is perfect, from the smooth look and finish to a smooth operating lever.

Easy Pull Clutch Lever:
Our patent pending easy pull clutch lever offers 30% less force to pull over the stock lever, utilizing the stock Harley clutch cable without modification and works on all Harley with the eye or loop style cable. The Elite clutch lever only takes minutes to install without the need to disassemble our lever/perch assembly. There are four different length clutch levers to choose from, 1 Finger, 1.5 Finger, 2 Finger and the 3 Finger being approximately 1” shorter then stock. There is a option of a mirror mount which can be flipped 180 degrees to either lower or rise the mirror/blinker.
Beneath the mirror mount is a set screw to adjust the reach of the lever for those riders with shorter fingers looking for a little more comfortable position. With the 1” handlebar being standard on all Harleys we also offer a 7/8” option for those riders looking to change their bar size. All of our clutch levers come standard with two sealed ball bearings pressed into the lever itself while using a custom pivot bolt to secure it into the perch body.

Front Brake Lever:
Our front brake lever shares the same shape/styling as the clutch lever and gives a nice finishing look to the bike while providing a nice feel. When selecting the lever color above, both the clutch lever and brake lever will be sent in the same color. The front brake lever ONLY comes in the 2 finger length.

NOTE: For the bikes with a clutch safety switch, the clutch lever assembly does NOT utilize the switch and the bike will either need to be started in neutral or the switch deactivated. The switch itself can be found in the clutch side switch housing.

  • CNC Machined Aircraft Aluminum
    Covered Top Perch to keep from pinching or snagging rider
    4 Lever Lengths for a Custom Fit
    Available in 8 Different Colors
    Perfect Fit to Handlebar to Prevent Scratching or Digging
    Easy Adjuster with Smooth Feel Surface
    Field Tested
    MADE IN U.S.A.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 1 people found the following review helpful:
4 of 5 HD Easy Clutch and front brake levers April 24, 2020
Reviewer: Dyna Rider from Leander, TX United States  
These levers are truly crafted nicely.  When I received them, they came very well packaged and protected from scratching.  They also threw in a couple of stickers, if you are into that.  A nice touch.  

I put the clutch lever on without an issue, and the pull is very much easier.  I would have given 5 stars, but when I went to install the front brake lever, I found the OEM pin that goes through the perch was a tad bigger in diameter preventing the lever from being installed.  I sanded the inner diameter on the lever and I also sanded down the pin around the circumference to allow for install.  I probably put in about a good half hour to an hour on sanding things down, but once I got it in and the circlip on the bottom of the pin, it felt great.

I'm happy; I just wish the brake lever would not have to be modified to fit.  I also wonder how my modification (sanding) will impact corrosion resistance in the long run.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
5 of 5 Great product! March 11, 2020
Reviewer: Natty Bumppo from KY United States  
These came highly recommended from some local Hoons and for great reason. They are extremely high quality and very good looking. I went with the black perch and cap with gold levers to match my mags and pedals. They are no different to install than OE levers, except for the clutch connection. The clutch connection is much better than OE, it gets rid of that plastic block that sits inside the cable and replaces it with an integrated peg with a nice cover and bolt to hold it all in. Great stuff! Will be buying these for all of my bikes in the future.

Was this review helpful to you?